Rear and front panel diagrams
1
DMX Input - 3 pin male XLR interface for DMX connections
2
DMX Output - 3 pin female XLR interface for DMX connections
3
LED function setting display - shows the various menus and the selected functions
4
Menu buttons - used to select the different menu items (Menu / Up / Down / Enter)
5
Cooling vent - do not cover
6
Microphone - for sound-to-light operation
7
Mains power input IEC socket and fuse compartment
8
Laser apertures
9
LED lenses
Main Menu
To select any of the menu options, press the MENU button on the rear of the unit to select the mode required.
Once you have made a selection then press ENTER to confirm. Use the UP and DOWN buttons to choose the desired menu option.
Mode Selection
Press the MENU button, the following functions can be selected and then confirmed using the UP, DOWN, and ENTER buttons:
LED display
Function description
Addr
DMX address 001-512. Press up/down buttons to select
SLAv
Slave Mode
CF01-CF99
Colour fade mode. 01-99 fade speed from slow to fast
CJ01-CJ99
Colour jump mode. 01-99 jump speed from slow to fast
CP01-CP99
Colour pulse mode. 01-99 pulse speed from slow to fast
CT01-CT99
Colour strobe mode. 01-99 strobe speed from slow to fast
rGb
Sets the brightness of Red, Green and Blue LED’s 0-255. Press ENTER to save
dEmo
Auto mode
Soud
Sound to light mode
L rG
Green and Red lasers both on
L G
Green laser only
L r
Red laser only
L oF
Laser off
L Au
Laser cycles through auto programs