178.960UK User Manual
Internal media player
The PAL8 unit has an internal media player for digital audio playback from Bluetooth, USB,
microSD, FM tuner or AUX input. This is controlled by 5 buttons (2) beneath the display (1).
Press
MODE
to select the required source - Bluetooth, USB, microSD, FM radio or Line input
–
Use this mode for both USB and microSD cards
FM Radio
–
(the last chosen frequency will appear
–
i.e. 89-107MHz)
–
Use this mode for Bluetooth
selection
–
selects the 3.5mm / 2 x RCA line input in the rear panel (5)
Playback from USB Device or microSD Card
Inserting a USB memory device into the USB input or microSD card into the microSD card slot
will automatically load up and begin playback of mp3 or wma audio tracks stored on the media.
If playback does not start, press the
(play/pause) button or remove the memory device
and check that the stored files are the correct compressed audio format before re-connecting.
MODE
Selects the input source: - Bluetooth, USB, microSD, FM tuner, AUX input.
holding this button for 3 seconds will activate the
TWS
pairing mode.
Steps backwards through tracks on USB/microSD media, smart phone, FM channels.
holding this button for 3 seconds will switch the front
LED
effect on or off.
Alternately plays or pauses the current track.
In Bluetooth mode, holding this button for 3 seconds will disconnect the pairing.
Steps forwards through tracks on USB/microSD media, smart phone or FM channels.
holding this button for 3 seconds will activate or deactivate the
TALKOVER
function.
REPEAT
Select repeat
track / repeat
/
random order /
repeat folder
If a USB or microSD card is inserted and the player is in Aux or FM mode, then
holding this button for 3 seconds will enter the recording mode.
FM Tuner
In FM tuner mode, the station frequency (in MHz) will be displayed.
For initial setup, press
(play/pause) to begin the auto-tuning process.
The tuner will seek through all frequencies for strong signal reception (i.e. radio stations)
These will be stored into memory as
,
,
,
…
etc.
Stored stations can then be selected using the
or
buttons
