Avsl qtx LED DERBY IV User Manual Download Page 3

 

151.600UK User Manual

 

 
Manual control menu 

Press the “menu” button to enter and navigate the settings menu, press “up” and “down” to 
change the value of the setting, press “enter” to confirm setting. 

 

!

!"#$

 - 

DMX initial address setting, press up and down to change the address 

value and press enter to confirm change of setting. 

!#

 - 

auto mode 1, red LED only, press up and down to change the rotation speed. 

!$

 - 

auto mode 2, green LED only, press up and down to change the rotation speed. 

!%

 - 

auto mode 3, blue LED only, press up and down to change the rotation speed. 

!&

 - 

auto mode 4, white LED only, press up and down to change the rotation speed. 

!"

 - 

auto mode 5, RGBW 4 colour jump, press up and down to change the rotation speed. 

!'

 - 

auto mode 6, mix colour jump, press up and down to change the rotation speed. 

!(

 - 

auto mode 7, colour scroll, press up and down to change the rotation speed. 

!)

 - 

auto mode, RGBW full on strobe, press up and down to change the rotation speed. 

*#

 - 

sound to light mode 1, RGBW full on, press up and down to change the rotation speed. 

*$

 - 

sound to light mode 2, mix colour jump, press up and down to change the rotation 

speed. 
 
For master and slave connection, simply set master unit to auto/sound to light without DMX 
connected to it. Connect the DMX out of the master to DMX in of the slave unit, further slave 
units can be synchronised by daisy chaining the DMX signal from the slave unit. 

 
DMX operation 

As well as manual control, DERBY IV can be also control through 7 DMX channels. Ensure 
DMX menu is selected at the back of the unit and correct DMX address value is entered. 
Connect your DMX signal to DMX in unit using a BALANCED XLR lead. 
 

DMX channel value reference

 
Channel 

DMX Value 

Function 

Channel 1  

000-255 

Strobe 0 – 100% 

Channel 2 

000-255 

Red dimmer 0 – 100% 

Channel 3  

000-255 

Green dimmer 0 – 100% 

Channel 4  

000-255 

Blue dimmer 0 – 100% 

Channel 5  

000-255 

White dimmer 0 – 100% 

000-127 

Rotation position 

Channel 6  

128-255 

Auto rotate, speed increase 
with value 

000-009 

N/A 

Channel 7 

010-255 

Auto mode, speed increase 
with value 

 
 

Summary of Contents for qtx LED DERBY IV

Page 1: ...BY IV light effect This is the latest generation of the classic Derby light effect with 4 colour output Two high power 4 in 1 LEDs deliver vivid RGBW colour combinations which are split through precision optics to create a sharp multi beam array Internal programming offers auto and sound activated operation with dual rotation and strobe effects Ideal for lively and colourful coverage on dance floo...

Page 2: ... or damaged plugs Installation Installation should be carried out by qualified personnel only and must comply to HSG95 guidelines Before installation check all the functions are working correctly When satisfied disconnect the power from the unit The product is supplied with a U bracket for overhead mounting Avoid mounting light effect at head level We advise the unit should be a minimum of 3m from...

Page 3: ...ange the rotation speed sound to light mode 1 RGBW full on press up and down to change the rotation speed sound to light mode 2 mix colour jump press up and down to change the rotation speed For master and slave connection simply set master unit to auto sound to light without DMX connected to it Connect the DMX out of the master to DMX in of the slave unit further slave units can be synchronised b...

Page 4: ...ard BSEN62471 2008 Troubleshooting Check mains voltage is correct and outlet is switched on No power mains Check IEC lead and fuse if fuse continually blows refer to your dealer No LED display Press any control panel button Check control panel mode settings ensure it is not in DMX mode No light output Check DMX settings from controller dimmer levels blackout etc No strobe output Check strobe mode ...

Reviews: