151.600UK User Manual
Warning
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments.
In the event of a spillage, disconnect the mains and allow the unit to dry out naturally.
Qualified personnel should then check the unit before continuing use.
Please do not open cover as it contains high voltage.
This product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service or repair.
•
Always check for correct voltage and make sure the IEC lead is in a good condition.
•
Always ensure DMX leads are in good condition with no short connections or damaged
plugs.
Installation
Installation should be carried out by qualified personnel only and must comply to HSG95
guidelines. Before installation check all the functions are working correctly. When satisfied,
disconnect the power from the unit. The product is supplied with a U bracket for overhead
mounting. Avoid mounting light effect at head level. We advise the unit should be a minimum
of 3m from the ground or stage, not directly projected into an audience, minimum of 50cm
from any wall or other fixture to allow sufficient air ventilation.
•
Strictly designed for indoor use only.
•
Avoid installation in dusty or moist environments or near a source of heat.
Product layout
1.
LCD display
2.
Manual control buttons
3.
Built-in mic
4.
DMX signal in
5.
DMX signal out
6.
Earth connection (DO
NOT REMOVE)
7.
IEC mains input
