background image

Web Interface: EDID Manage

Using the built-in EDID manager, a multitude of EDID’s can be set for each input, and each input can 

be assigned a different EDID.  This should be used to optimize sources or to manage infrastructure.  

The EDID options are:

1. 1080P_2CH

2. 1080P_6CH

3. 1080P_8CH

4. 1080P_3D_2CH

5. 1080P_3D_6CH

6. 1080P_3D_8CH

7. 4K30HZ_3D_2CH

8. 4K30HZ_3D_6CH

9. 4K30HZ_3D_8CH

10.  4K60HzY420_3D_2CH

11.   4K60HzY420_3D_6CH

12.   4K60HzY420_3D_8CH

13.   4K60HZ_3D_2CH

14.   4K60HZ_3D_6CH

15.   4K60HZ_3D_8CH

16.   1080P_2CH_HDR

17. 1080P_6CH_HDR

17.   1080P_8CH_HDR

18.   1080P_3D_2CH_HDR

19.   1080P_3D_6CH_HDR

20.   1080P_3D_8CH_HDR

21.   4K30HZ_3D_2CH_HDR

22.   4K30HZ_3D_6CH_HDR

23.   4K30HZ_3D_8CH_HDR

24.   4K60HzY420_3D_2CH_HDR

25.   4K60HzY420_3D_6CH_HDR

26.   4K60HzY420_3D_8CH_HDR

27.   4K60HZ_3D_2CH_HDR

28.   4K60HZ_3D_6CH_HDR

29.   4K60HZ_3D_8CH_HDR

30.   User EDID 1

31.   User EDID 2

32.   User EDID 3

*You may also copy EDID from any output and apply to any input, simply select “Copy EDID from Output x” (x=1-4). This 

will copy the EDID from the display attached and store it into “User EDID 1” and apply it to the input you have selected.

30

Summary of Contents for conferX AC-CX84-AUHD






































Reviews: