AVPro Edge ~ 2222 E 52
nd
ST N, Sioux Falls, SD, 57104 ~1.877.886.5112 ~ +1.605.274.6055 ~ [email protected]
9 of 29
(TOP)
Encoders, Inputs & Sources
( AC-MXNET-1G-E )
The MXNet Encoder is the starting point where all sources and hosts are connected for distribution of audio
and video signals to the end points at the other end of the connection. Video sources, audio sources, USB
hosting for KVM functions, RS-232 encapsulated control, RS-232 direct passthrough, and IR passthrough all
start at the Encoder. With only 3-5 watts of power usage, the POE powered AC-MXNET-1G-E sets a standard
for efficiency. The only thing missing? The fan. That’s correct, there’s no cooling fan because both of our
MXNet Encoders AND Decoders use an integrated metal chassis and chip-top heatsinks to efficiently disperse
heat.. The entire internal frame acts like one giant heatsink. On the next few pages, we will breakdown the
plethora of connections waiting to be discovered . . .
(FRONT)
B
POWER indicator light. During booting, the light will slowly pulsate until the incoming power (POE or
charger) stabilizes. At that point it will turn to a solid blue light.
C
LINK / SINK indicator light. This light will flash green until it connects to a Decoder at
which point it will turn to a solid green light.
D
EDID COPY FROM HDMI LOOP OUT – copies the EDID of the display
connected to the HDMI Loop Out connector on the back of
Encoder.
E
RS-232 signal passthrough and routing from an RS-232
(BOTTOM)
bridge to any Decoder.
F
IR IN / I-PASS / IR-EYE – IR signal passthrough using two
methods: I-PASS which allows for a 3.5mm direct connect
of an IR emitter from an IR bridge or control system CPU or
processor.
G
IR IN / R-EYE supports taking a flashing IR emitter from