AC-MX44
/88
-AUHD-HDBT
pg.
8
AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
Audio Binding Setup:
The AC-MX44
/88
-AUHD-HDBT can be configured to extract audio in
3 ways
•
Bind to OUTPUT
(Default)
(See page 10)
•
Bind to INPUT
(See page 10)
•
Matrix
(See page 10)
To Set:
1.
2.
Press and hold (3 sec) BYPASS from the audio settings (top right of
machine).
Toggle selection by pressing the "UP" and "DOWN" buttons
3. Once a desired selection is found, quick press the BYPASS button
again.
Audio Matrix Control:
Once in "Matrix" mode for audio, the extracted audio routing on the AC-MX44
/88
-
AUHD-HDBT can be controlled from the front panel:
To Control:
1. Press and hold (3 sec) BYPASS button from the audio settings (top right of
machine).
2. Make sure the screen says "Matrix" and quick press the BYPASS button again
in order to enter the AUDIO MATRIX.
3. Press the desired extracted audio OUTPUT.
4. Press the INPUT for the desired audio source.
5. Quick press BYPASS button again to exit audio matrix .
Press &
Hold
"Bypass"
Use Up/
Down to
toggle
mode
When audio matrix mode is ON, press and
hold "Bypass" to enter route selection
Choose extracted
audio OUTPUT first
Then choose
the INPUT
