©AVProEdge | 2222 E 52nd Street N Sioux Falls, SD 57104 1.877.886.5112 | +1.605.274.6055
8
Audio:
The extracted audio is always active by default, you may simply plug into any/all of
the ports (Toslink, SPDIF, 2CH) and the audio will be output based on the active source.
Additional audio commands can be sent by RS-232.
IR Routing:
IR can be routed in three ways
1. To the remote (HDBaseT Receiver) end by inserting an IR Receiving Eye
into the IR In port on the AC-DA210-HDBT.
2. Back out of the IR Out port on the AC-DA210-HDBT by placing an IR
Receiving Eye in the AC-EX70-UHD Receiver’s IR In port
3. Directly from a control system using a cable as designed below.
