AC-SC2-AUHD-GEN2
Quick Start Guide
The AVPro Edge’s AC-SC2-AUHD-GEN2 is the ideal solution for integrators that are
needing to distribute a signal to a variety of displays and keep an optimal picture.
Integrators will enjoy it’s versatility of not only being able to control up/down
scaling but han¬dling EDID issues (including 4K HDR EDID’s) and being able to access
audio from the stream. This scaler is ready for future content as well as it’s able
to distribute 18Gbps signaling. Yet if you have 480, 720, or 1080 displays the AC-SC2-
AUHD-GEN2 will make sure it’s getting the right picture.
This Quick Start Guide Will be going over:
-Installation
-Control
-Output Timing
-EDID Settings
-Test Pattern
-Troubleshooting
Installation
1. Connect the SC2 Gen 2 to the power source
2. Connect the Source to the “HDMI in” on the sc2 via hdmi cable
3. Connect the display to the “HDMI Out” on the sc2 via HDMI cable
The Ultimate Toolbox: 18Gbps Signal Manager, Up/Down Scaler, EDID Manager, Audio De-Embedder
