COPY DEVICE EDID
While in the USER EDID state (8), press and hold the setting button (for 4 seconds) in order to copy the EDID from
the connected display or downstream device (Power LED will flash twice) to the user EDID and it will apply
automatically.
Why do this?
This is commonly used when there is a need for a specific, known EDID that the installer may prefer. It can also
be used if you want to bypass an EDID of an AVR or another connected device. (IE, Plug the extender kit directly
into a display and COPY the EDID. Plug it back into an AVR that may not have a current/good EDID).
1. Normal Mode(ICT Mode) --- LED Flashes 1 Time
2. Down Scaler Mode (4K->2K) --- LED Flashes 2 Times
Scaler Setting:
While in ANY state besides the USER EDID state, press and hold the setting button (for 4 seconds) to toggle the
scaler mode. The options are:
EDID Management:GEN2
*NOTE:
(Indicated by part number AC-EX40-444-T-2)
4 LED lights on the board inside the chassis (see below)
Corresponding light will be solid, the others will flash
AC-EX40-444-KIT
Page 7