Avonic CM60-IPU, Manual

Page: 52 / 84

www.avonic.eu
52
2. Check whether the camera can self-test after startup.
3. Check the BOTTOM switch and make sure the two switches are both set OFF.
4. Check video cable is connected correctly.
⚫
Abnormal display of image
Check video cable is connected correctly.
⚫
Image dithering even at widest zoom position
1. Check whether camera is fixed correctly.
2. Make sure if there are something like vibration machine or other things nearby.
⚫
Browser has no video image
When IPC by a web browser, it needs to install plug-in.
⚫
Unable to access IP Camera by web browser.
1. Access to the network with PC can test whether network works, in this way to get rid of
cable failure, network failure caused by PC virus until the PC can be Ping.
2. Disconnect IP Camera with network, IP Camera and PC are connected, according to the
proper operations to re-set the IP address.
3. Check the server's IP address and subnet mask and gateway address.
4. MAC addresses conflict.
5. Web port is occupied by other devices.
⚫
When modify IP address in an incorrect way cause the wrong IP address or forget
web passwords, press the IR remote controller "[*]+[
＃
]+[Manual]" to restore the
default value (Default IP: 192.168.100.88 Default username: admin Default password:
admin)