Avonic CM60-IPU, Manual

Page: 47 / 84

www.avonic.eu
47
Default the IP address is 192.168.100.88, The MAC address can be modified.
Port Settings
HTTP Port
IP address identifies the network device, the device can run multiple web applications, each
network program using network port to transmit data, so data transmission to be carried out
between the port and port. Port setting is to set up WEB SERVER program using which port
to transmit. When port mapping, need to be consistent with the port number(default port: 80)
RTSP Port
IP camera support RTSP protocol, use the VLC tools broadcast.
PTZ Port
Support PTZ protocol, default port: 5678.
Control Protocol Setting
Setting camera control communication protocol, include Visca address, Pelco-D address, Pelco-
P address.
RTMP Setting
Setting the camera stream, can set up two stream, in the two stream selection control code
stream of "On", "Off", "Video", "Audio", etc.
RTSP Setting
Setting IP camera RTST protocol of "On", "Off".
ONVIF Setting
Setting the ONVIF protocol and ONVIF authorization "On", "Off".
Multicast Setting