Avonic CM50-IP, User Manual

Page: 38 / 44

37
image will be, more network bandwidth will be
taken.
5) Bit Rate
User can assign bit flow/stream, normally
speaking, the bigger bit flow is, the clearer the
image will be. The bit allocation must combine with
network bandwidth, when the network bandwidth is
too narrow and the allocated bit flow is too big, will
cause video signal flow not to be transmitted
normally, the video effect will be worse.
6) Maximum frame rate
User can specify the size of the frame rate,
generally, the frame rate greater, the image more
smooth; Frame rate is smaller, the more sense of
beating.
7) Bit Rate control
Code stream control way:
Constant bit rate: video coder will be coding
according to preset speed
Variable bit rate: video coder will adjust the
speed based on preset speed to gain the best image
quality.
8) I key frame interval:
Set interval between 2 I frame, the bigger
interval is, the response will be lower from viewing
window.
9) dFluctuate level
Restrain the fluctuation magnitude of variable
rate, grade 1 ~ 6
3 Image Setup,please click “Image”
1) Brightness
Image bright 0~100, slider control, on the right
shows the corresponding numerical. Default 43.
2) Saturation