www.avonic.eu
15
www.avonic.eu
15
•
Cannot enter WebGUI
- Check network cable
- Check if PC is in the same subnet as camera
•
Firmware update failed
- Check fi rmware fi le integrity, download it again.
•
No self-test (PTZ cameras only) and no power LED
- Check the net power
- Check the power supply
•
Remote Controller does not work
- Check power of the controller
- Check RS-232 or RS-485 cable quality, length, polarity and network architecture
- Check serial communication settings on both camera and controller
- Check VISCA / PELCO address settings on both camera and controller
•
No image
- Check power of camera and monitor
- Check video cable quality and length
- Check if video specifi cations of monitor match the specs of the camera
•
Abnormal image
- Check video cable quality and length
- Check cable connections
•
Dithering or fl ickering image
- Check camera fi xation and nearby vibration sources
- Check anti-fl ickering setting in OSD
- Check Noise Reduction settings in OSD
•
Color issues
- Check options in OSD, like exposure, color temp, Red and Blue tuning
WebGUI (if applicable)
Control
Image
