PERIODIC INSPECTION CHART
•
Frequency of maintenance operations may be adjusted according to the operating
conditions, but the following table give general guidelines.
•
The mark (
) indicates the check ups that you may do yourself.
•
The mark (
) indicates work to be done by your dealer.
Maintenance Interval
Initial
Thereafter
Every
Item
10
hours
50 hours
3 months
100 hours
6 months
100 hours
6 months
200 hours
12 months
Spark plug
Cleaning/Adjustment/
Replacement
Greasing points
Greasing
Bearing points
Greasing
*1
*2
*2
Fuel system
Inspection
Fuel filter
Checking/Replacement
Fuel tank
Cleaning
Oil injection
system
Inspection/Cleaning
Carburettor
setting
Inspection/Adjustment
Trolling speed
Adjustment
Carburettor
throttle shaft
Inspection
Cooling-water
passages
Cleaning
after every use
Bilge strainer
Cleaning
Impeller
Inspection
Steering cable
Inspection/Adjustment
Shift cable and
mechanism
Inspection/Adjustment
Throttle cable &
choke cable
Inspection/adjustment
Drain plugs
Inspection/Replacemen
t
Battery
Inspection of fluid level
before every use
Rubber
coupling
Inspection
Bolts and nuts
Re-tightening
•
*1: Grease capacity, 33.0-35.0 cm³ (2.00-2.14 in³)
•
*2: Grease capacity. 6.0-8.0 cm³ (0.37-0.49 in³)
WARNING
Modifications to this machine not approved by Avon
Inflatables Ltd. may cause loss of performance or excessive
noise, or render it unsafe for use. Consult your Dealer before
attempting any changes.
TOOL KIT
•
It is always advisable to carry the Owners Manual and a tool kit with you whenever
you use the Jet boat. The service information included in this manual is intended
to provide you, the owner, with the neessary information for completing your own
preventive maintenance and minor repairs. Make sure the tools, you select, are
sufficient for this purpose.
33
