3
Model
Y110RG-BP-S
Buttons design might be slightly different from the actual one you purchased
depending on individual models.
According to the type of air conditioner (cooling only/cooling and heating type)
setting the application of remote controller:
After power on, the remote control displays "cooling" and "heating" alternatively
at intervals frequency of 1 Hz.
1.When display “cooling”, press any key( don’t transmit ), cooling only model has been
set and the display shows cooling control interface.
2.When display “heating”, press any key( don’t transmit ), heat pump model has been
set and the display shows cooling control interface.
Note:The remote control enters cooling and heating type automatically and shows
cooling control interface if no key be pressed within 10 seconds.
All the functions described are accomplished by the indoor unit.
If the indoor unit has no this feature, there is no corresponding operation
happened when press the relative button on the remote controller.
1. Operating Mode: AUTO, COOL, DRY, FAN and HEAT.
2. Timer Setting function in 24 hours.
4. Full function of LCD (Liquid Crystal Display).
3. Indoor Setting Temperature Range: 16 C~31 C.
Rated Voltage
Signal Receiving Range
Environment
3.0V(Dry batteries R03/LR03X2)
8m
-5 C~ 60 C
Remote Controller Specifications
Performance Feature
NOTE:
Select the cooling only or cooling and heating type of the remote
Summary of Contents for Y110RG-BP-S
Page 12: ...w w w a v o l t a c o m s g...
