USB
1. Insert your USB Drive into USB jack.
2. Press
MODE
to select
USB
then switch on the dock mode.
3. Then, USB will playback automatically.
→ By using the buttons (PLAY/PAUSE, SKIP+/- and VOLUME) and its remote control, the following
disc playback features are available: Play/Pause, selecting next/previous track and changing
volume.
4. Turn
VOL+/-
to adjust the sound level.
5. Press
POWER ON/OFF
button to turn USB off.
NOTE:
POWER ON/OFF button. If not, it will damage your USB
life.
CARD
1. Insert your SD/MMC CARD into CARD jack.
2. Press
MODE
to select
CARD
then switch on the dock mode.
3. Then, CARD will playback automatically.
→By using the buttons (PLAY/PAUSE, SKIP+/- and VOLUME) and its remote control, the following
disc playback features are available: Play/Pause, selecting next/previous track and changing
volume.
4. Turn
VOL+/-
to adjust the sound level.
5. Press
POWER ON/OFF
button to turn CARD off.
NOTE:
POWER ON/OFF button. If not, it will damage your
.
Connecting an external device
You can listen to the sound of the connected external device through your another audio devices.
1. Use a line-in cord (not included) to connect an iPod shuffle or another audio devices to the
LINE-IN
Jack.
2. Press
MODE
to select
AUX
mode.
3. The iPod shuffle or another audio device will now play through the speakers of the units.
Using Sleep Mode
This set has a built-in sleep timer, which enables the radio to be automatically switched off after a set period
of time. There are eight sleep time options.
Setting and switching off SLEEP
1. Set your timer by pressing
SNOOZE
repeatedly until the desired timer option appears.
→ Selections are follows (time in minute):
00 => 05 => 10 => 15 => 30 => 45 => 60 => 90 => 120
2. The set will turn off automatically at the selected time.
3. To cancel sleep, press either:
→ SLEEP once or more until “00” disappears from the display.
Before removing your USB Drive, press
Drive
Before removing your CARD, press
CARD life
Basic Operation
Radio
1. Press
MODE
to select
RADIO
mode. (Display shows the radio frequency of the last selected wave-
band. Your preset station is also shown if you are listening to a preset.
2. Automatic tuning:
→
Press and hold the
SCAN
button until the display begins to move, then release the button. The
tuner will scan up or down the band frequency until it finds the first strong station
and stop on that
stations
then store a program memory automatically. Repeat this process until the tuner stops on
your desired station.
Manual tuning:
→
Press and hold the
SKIP+/SKIP-
button repeatedly until the display is showing the frequency to
your desired station. Use the manual tuning method tp tune to weaker stations that are bypassed
during Automatic Tuning.
3.
Adjust the sound using
VOL+/-
.
When you have finished listening to the radio, press
POWER ON/OFF
button to turn the unit off.
Hints for best reception:
FM: The receiver has a built-in FM pigtail aerial hanging at the rear cabinet. This wire should be totally
unravelled and extended for best reception.
Storing and using preset stations
You can store 10 FM radio stations in the memory.
1. Press
SKIP+/SKIP-
button to tune your desired station.
2.
Press and hold
MEMORY/SET
button in a second,. (”MEMORY” will flash on the display) to activate
the programming mode.
3. Press
SKIP+/SKIP-
button to select the preset number you desired.
4. Press
MEMORY/SET
button to store the station.
5. Repeat step 2-4 to store your another stations
6. Press
MEMORY/SET
button to listen to a preset stations.
iPod
Playing and charging your iPod
NOTE:
Before plugging your iPod in the dock, snap the suitable insert into the dock to provide a snug fit for
the player to be docked.
1. Snap the compatible iPod into the dock connector.
2. Press
MODE
to select
IPOD
then switch on the dock mode.
3. Then, iPod will playback automatically.
→ By using the buttons (PLAY/PAUSE, SKIP+/- and VOLUME) and its remote control, the following
disc playback features are available: Play/Pause, selecting next/previous track and changing
volume.
4. Turn
VOL+/-
to adjust the sound level.
5. Press
POWER ON/OFF
button to turn unit on/off.
NOTE:
If your dock an iPod with a drained battery, it may take up to 6 minutes of charging before the iPod
will respond.
4.
Basic Operation
ENG-7
ENG-6
Ipod Mini
1st Gen Nano
Thin Ipod
1st Gen Nano
Ipod Mini
Thin Ipod
iPod nano 2GB/4GB
iPod mini 4GB/8GB
3rd nano 4GB/8GB
5th 30GB
iPod classic 80GB
*Remark: This model does not support “video out”.
