AVOCOR AVF-7550 Page 21 Installation And Operation Manual Download

Page: 21 / 77

Revision Date: 2018/07/25

No.

Connector

OPS USB 3.0

A standard USB connector of the OPS slot for connecting external multimedia player devices.

WPS

WPS(HDMI) input for connecting Wireless Presentation sources to the display.

3, 6, 22

Touch USB

Standard, Type-B USB 2.0 ports for connecting touch sources to the display.

4, 7

HUB USB 3.0

Standard USB 3.0 type A connectors for connecting external media, keyboard, keyboard or mouse.

5, 16, 17, 23

HDMI 1, 2, 3, 4

HDCP-compliant HDMI 2.0 digital video input for connecting HDMI sources.

LAN

An RJ-45 connector for interfacing with a PC or home theater automation/control system via a Cat

5 cable.

RS232C

A female, 9-pin D-sub connector for interfacing with a PC or home theatre automation/control

system.

SPDIF

Connects external and powered digital speakers or audio receiver/amplifier.

Audio Out

Connects external, powered speakers or an external audio receiver/amplifier.

Connects an IR Extender cable from this input.

Audio In

Connects the audio output from a personal computer here.

VGA

Connects components that have RGB or component output jacks, such as a personal computer or

external DTV decoder (a break-out c able is needed for BNC-type connection).

HDMI Out

HDCP-compliant HDMI output that will support inputs HDMI 1, HDMI 3, DisplayPort, & WPS

DisplayPort

DisplayPort 1.2 and DisplayPort-HDCP 1.1 compliant, SD/HD input for connecting SDTV, EDTV or HDTV

component video sources.

Service Port

A standard USB Type A connector for connecting the USB stick that comes with the package to

upgrade firmware.

Touch USB HUB 3.0 in

Type-B USB 3.0 port for connecting touch and media sources to the display for ports 14, 16, 17 & 18.

OPS (Open Pluggable Specification) Slot

An optional OPS slot for connecting an internal PC to display 4K content.

OPS USB

A standard USB 2.0 connector of the OPS slot for connecting external multimedia player devices.

HUB USB

Standard USB 2.0 type A connectors for connecting external media, keyboard, keyboard or mouse.

Summary of Contents for AVF-7550














































































Search results

Summary of Contents for AVF-7550

Reviews:

Related manuals for AVF-7550

Brands by name

Popular brands

AVOCOR AVF-7550, Installation And Operation Manual

Search results

Summary of Contents for AVF-7550

Reviews:

Related manuals for AVF-7550

Brands by name

Popular brands