Before setting up your display to support touch screen capability, ensure that:
•
The touch screen controller host computer is turned off.
•
The display is turned on.
•
The video output from the computer is connected to a video input on the
display.
Connecting the Display to a Host Computer
1. Connect the signal cable to the display, and then turn on the display.
2. Connect the USB Cable (USB Type-A connector) to the display.
3. Connect the other end of USB cable (USB Type-A) to the USB port on the
laptop/ PC.
4. Then turn on the computer.
5. When USB cable is fully connected, wait for 5 seconds and the touch function is
ready. It can be activated by using the stylus or finger.
Enabling the Touch Screen
