RFSoC Development Kit Getting Started Guide
Page 3
Introduction
This tutorial serves as an introduction to the Avnet Zynq
®
Ult
TM
RFSoC Development Kit with
Qorvo RF Front End. Using the Avnet RFSoC Explorer
®
graphical user-interface in MATLAB, you will
control the ZCU111 development board, generate and acquire signals through the Qorvo front-end card.
DISCLAIMER:
This tutorial is provided for reference/educational purposes only and may not reflect
results observed with other test equipment.
Avnet RFSoC Development Kit Overview
The Avnet Zynq Ult RFSoC Development Kit with Qorvo RF Front End enables system
architects to explore the entire signal chain from antenna to digital using tools from MathWorks and
industry-leading RF components from Qorvo. We extend the functionality of the Xilinx Zynq Ult
RFSoC ZCU111 Evaluation Kit by adding the Qorvo 2x2 Small Cell RF front-end card, plus native
connection to MATLAB
®
& Simulink
®
with Avnet's RFSoC Explorer
®
application.
or contact your local Avnet FAE for further details.
Figure 1 - Avnet Zynq Ult RFSoC Development Kit with Qorvo RF Front End
