RFSoC Development Kit Getting Started Guide
Page 29
2.
By default the LTE waveform is generated at its native sampling rate of 30.72 MSPS. Accept the prompt to
re-sample the signal at the current DAC sampling rate.
3.
Scroll through the LTE parameters table to confirm the new sampling rate of 798.720 MSPS.
Set interpolation factor to 8X. Set the complex mixer frequency to 1842 MHz. (See
Press ‘Configure’ to send the DUC parameters to the RFSoC RF Data Converter subsystem.
Press ‘Download’ to transfer the signal data from MATLAB to the DAC memory buffer of ZCU111.
Figure 25- Generating a 20 MHz LTE waveform
4.
Select ‘Tile 3 ADCs’ within the Tab group at the top of the screen.
