MSC Q7-MB-EP6
User Manual
26 / 35
3.7
USB Topology
Eight USB ports are normally provided by the Qseven
TM
module. The assignment of the ports
is defined in Table 16:
Signal
Source
Target Remark
USB[1]+
USB[1]-
Qseven
TM
connector
USB1
X604
USB Client / Host
USB[2]+
USB[2]-
Qseven
TM
connector
USB2
X601
On board 5x1 Pin Header
USB[3]+
USB[3]-
Qseven
TM
connector
USB3
X602
Single USB 2.0 Connector
USB[4]+
USB[4]-
Qseven
TM
connector
USB4
X502
miniPCIe connector
USB[5]+
USB[5]-
Qseven
TM
connector
USB5
X603
Single USB 2.0 Connector
USB[0]+
USB[0]-
Qseven
TM
connector
USB0
X704
USB 3.0 Connector (USB 2.0 interface)
USB[6]+
USB[6]-
Qseven
TM
connector
USB6
X704
USB 3.0 Connector (US,
USB_SSRX0-)
USB[7]+
USB[7]-
Qseven
TM
connector
USB7
X704
USB 3.0 Connector (US,
USB_SSTX0-)
Table 16
USB ports assignment
Micro AB USB Connector (X604)
References:
Type:
Kycon KMMX-ABSMT5SG-30
Mating:
Micro AB USB-cable
Pinout:
according to USB specification 2.0 [8]
The USB port can be configured as a client or host using jumper J601 or can also be
changed dynamically leaving the jumper open, according to the USB On-The-Go
Specification.
J601 pins
Function
1-2
USB micro AB client
2-3 (default)
USB micro AB host
Open
No default behavior
Table 17
Jumper option USB Client J601
USB 2.0 Connectors (X602, X603)
References:
Type:
Neltron 5075AR-08B-BK
Mating:
USB-A device
Pinout:
according to USB specification 2.0 [8]
