Version 1.0
Getting Started with the CC3000-Pmod
™
Compatible Wi-Fi
®
Adapter 13
Figure 8
5. When the LX9 MicroBoard’s Red LED “D2” goes on steady, this is an indication that it has contacted the
WAP/Router’s SSID “xfest2012-s6lx9” and is now connected.
a. If LED “D2” does not come on, attempt to:
– Reset the Microblaze application by pressing “SW5”.
– Reconfigure all (FPGA, DDR…) by pressing “SW4”.
6. At this point you should be able to open browser and make the connection to the webserver that is
running on the Microboard at 192.168.1.10 (http://192.168.1.10/), and the page you pull up should look
like the following:
Figure 9
a. Clicking “
Dispense
” should turn off LED “D2” and turn on LEDs “D9 & D10”.
b. Clicking “
Reload
” should turn off LEDs “D9 & D10” and turn on LEDs “D3 & D2”.
c. Alternately clicking the web page buttons will toggle the LEDs in the pairs listed.
This takes us to the end of the WiFi Webserver demonstration. For any issues with this demonstration please
contact Avnet Centralized Technical Support at
or via the web at
http://www.em.avnet.com/techsupport
