Page 12
6 Example Design
The Ultra96-V2 example design must first be written to the 16GB microSD Card, which ships
blank.
1. Please download the image and instructions using these links:
Instructions
http://avnet.me/Ultra96-flash-write
Image
http://avnet.me/ultra96-v2-oob (517 MB)
MD5 Checksum for Image
: d2676f376e74940e7cb02cbee6aecd49
2. Complete the process to write the image to your 16GB card.
3. Insert the microSD card into the Ultra96-V2 card cage J2.
7 Run the Out of Box Design
1. A terminal program is recommended if you want to view terminal output. TeraTerm was
used in this example which can be downloaded from the TeraTerm project on the
SourceForge Japan page:
Install TeraTerm or another terminal
program of your choice.
2. Set the Ultra96-V2 boot mode switch SW3 to SD Card boot mode as shown below with
Switch 1 in the OFF position and Switch 2 in the ON position.
Figure 4 – Ultra96-V2 SW3 Boot Mode Switch Location
Summary of Contents for AES-ULTRA96-V2-G
Page 10: ...Page 10 Figure 2 Ultra96 V2 Block Diagram ...
Page 26: ...Page 26 Figure 23 Connected to Ultra96 V2 Via External Wi Fi ...
Page 29: ...Page 29 Figure 28 Telemetry from PMIC 0x13 43 Figure 29 Telemetry from MPSoC Sysmon ...
Page 42: ...Page 42 7 Create or select your Host ID Click Next Figure 41 Select Host Information ...