Page 31 of 35
May 09, 2019
Data Sheet and User Manual
AES-MS-MT3620-M-G Module
Data Sheet and User Manual
OEM Instructions
This module is certified for installation into OEM end-products under the following conditions:
1) The intended use of this AES-MS-MT3620-M-G module is for
indoor locations
.
If the end product
using this module is able to operate in the band 5150-5250 MHz within Canada, it is
only
allowed to
be used indoors (to reduce potential harmful interference to co-channel mobile satellite systems)
The label of the end product in this case
must
include
the text “
For indoor use only
”
2)
It’s intended use is as a
Wi-Fi client
only (not a Wi-Fi access point or used in point-to-point mode)
3) The AES-MS-MT3620-M-G module is for (OEM) installation only.
4) It is the express
responsibility of the OEM host board manufacturer
to complete the following
two steps,
prior to distribution
of their final end-product:
a) The OEM must set the
region code
in the MT3620 eFuses (eg. to US / EU / JP) to restrict the
available Wi-Fi channels and transmit power according to the
region where it will be used
https://docs.microsoft.com/en-us/azure-sphere/hardware/factory-floor-tasks#verify-rf-
configuration
b) The OEM must set the
device manufacturing state
to
“
AllComplete
” to permanently disable
any future access to the RF Test Mode and the MT3620 eFuse programming
The requirement for software security of UNII devices, is fully met by Microsoft Azure Sphere's advanced
security. Software updates require certificate-based authentication using hardware-based root of trust.
