![AVM INSPIRATION CS 2.2 Operating Instructions Manual Download Page 19](http://html1.mh-extra.com/html/avm/inspiration-cs-2-2/inspiration-cs-2-2_operating-instructions-manual_3032806019.webp)
19
•
Now add this track to the playlist by pressing
ADD
(6).
•
Select title 3 using the buttons
< SELECT >
(4, 5). The display now shows "TRCK 3/15" in
the upper left corner.
•
Now add this track to the playlist by pressing
ADD
(6).
•
Select title 8 using the buttons
< SELECT >
(4, 5). The display now shows "TRCK 8/15" in
the upper left corner.
•
Now add this track to the playlist by pressing
ADD
(6).
•
Now press
STORE
(7) to finish the programming and store the playlist
Deleting an existing playlist
Press
MENU
(6) for more than 2 seconds. Then press
DEL PGM
(8) and the playlist is
deleted.
2.6.6
Random
To activate the
RANDOM
mode press
MENU
(6) for more than 2 seconds. Then press
RANDOM
(7). Press
PLAY
(8) to start the
RANDOM
playlist.
3
Advanced Settings
Your CS 2.2 offers a wealth of custom specific settings in its advanced settings menu. To
enter the menu just tap on the button
MENU
(6). The button now changes to
EXIT
. A second
tip on this button leads you to the normal operating mode. When the menu system is active
you can select the desired function using the buttons
< ITEM >
(4, 5). The setting is done
using the buttons
< VALUE >
(7, 8).
Depending on the actual source the advanced settings menu offers a range of selected
settings described in the following.
3.1
Global settings
3.1.1
Set tone control
Set tone control
activates or deactivates the integrated sound settings menu of the CS 2.2
which enables you to individually adjust the bass or treble level of a certain sound source or
lets you choose from a range of available loudness curves.
Set tone control
can be bypassed (
BYPASS)
or activated (
ACTIVE)
. In case the
set tone
control
option is activated
TONE ON
is shown in the display (4), otherwise
LINEAR
. When
switched to
ACTIVE
the sound settings menu is ready to operate but will only be enabled if
one of the associated parameters such as
set bass
,
set treble
or
set loudness
is being
altered. In case all three parameters are in a neutral position (
BASS = 0
,
TREBLE= 0
,
Summary of Contents for INSPIRATION CS 2.2
Page 1: ...Operating instructions INSPIRATION CS 2 2...
Page 2: ......