22
Factory Settings
7
Factory Settings
The adapters from the FRITZ!Powerline Set are delivered with preset
values for the adapter name, LED switching, power-saving function
(green mode) and network password settings. These four settings can
be changed as needed. There are two ways to restore the factory set-
tings later.
Restoring Factory Settings with the “Reset” Button
1.
Plug FRITZ!Powerline into an outlet.
2.
Press the “Reset” button on the adapter and hold it
down for ca. two seconds. Use a pointed object to do
this, for instance a paper clip or a mechanical pencil,
since the button is recessed in the top of the housing to
keep it from being pressed by accident.
All LEDs go out for a moment and then the adapter will re-
start. As soon as the “Power” LED stops flashing, the proce-
dure has been concluded.
Restoring Factory Settings with AVM FRITZ!Powerline
1.
Plug FRITZ!Powerline into an outlet.
2.
Use a network cable to connect FRITZ!Powerline to a
computer on which the “AVM FRITZ!Powerline” program
is installed.
3.
Start the “AVM FRITZ!Powerline” program and double-
click the icon of the FRITZ!Powerline.
The “FRITZ!Powerline Device Profile” window opens.
4.
Click the “Reset” button and then “OK”.
All LEDs go out for a moment and then the adapter will re-
start. As soon as the “Power” LED stops flashing, the proce-
dure has been concluded.
FRITZ!Powerline 520E-e.fm Seite 22 Donnerstag, 23. August 2012 6:27 18