Using FRITZ!Box Fon WLAN Features on the Analog Line
112
FRITZ!Box Fon WLAN 7170 – 11 Configuration and Operation by Telephone
Using FRITZ!Box Fon WLAN Features on the
Analog Line
When FRITZ!Box Fon WLAN is connected to an analog line, a
feature can be activated directly at the switching station only
if the line is set for this kind of configuration.
Call Forwarding (Call Diversion via the Central
Exchange)
Call forwarding is performed by the ISDN operator’s switch-
ing station. To use call forwarding, FRITZ!Box Fon WLAN must
be connected to an ISDN line. Then this feature can be used
to forward calls to an external line. Call forwarding is subject
to charges by the network provider and cannot be used for
forwarding calls to an Internet number.
In addition to call forwarding, there is also call diversion via
FRITZ!Box Fon WLAN. Use this kind of call diversion to divert
calls to internal and external lines. See the section “Call Di-
version over FRITZ!Box Fon WLAN” from page 108 for more in-
formation.
Do not activate both call forwarding and call diversion at the
same time.
For call forwarding you may specify whether you want incom-
ing calls to be forwarded unconditionally, after the fifth ring,
or when busy. Different settings may be configured separate-
ly for each number.
N
Pick up the handset.
sr
<feature>
Dial the sequence shown at left.
Next, enter the keyboard sequence your
network provider has defined for the de-
sired feature. The given keyboard se-
quence must be obtained from your net-
work provider.
