Suspend/Resume
FRITZ!Box Fon 5124 – 10 Configuration and Operation by Telephone
97
This command can be activated five times for each port.
To enable this feature, proceed as follows:
Callback requests can also be deleted manually, with the
oldest callback request being deleted first.
Suspend/Resume
The “Suspend/Resume” feature, also known technically as
“Terminal Portability”, allows you to suspend an existing
connection and resume it at another point on the S
0
bus. The
connection can be resumed at a different ISDN terminal de-
vice (such as an ISDN telephone) that is connected to your
BRI line along with FRITZ!Box Fon.
To suspend a call, proceed as follows:
M
You have just dialed a number and hear a ring tone.
5
If the call is not answered, within twenty seconds,
dial either the number “5”
or
Rs37r
the sequence shown at left.
Q
Wait for the acknowledgement tone.
O
Hang up the handset. As soon as the party you
dialed conducts a conversation from her or his
phone and this call is ended, your phone rings.
N
Pick up the handset. The number of the remote
party is dialed automatically.
N
Pick up the handset.
r37r
Dial the sequence shown at left.
O
Hang up the handset.
P
You are talking to Caller 1.
R
Press the Hold button. Call 1 is now suspended.
s1
PC
s
Dial the sequence shown at left. Type in the
parked-call ID as “PC”. The parked-call ID can be
any number between 0 and 99. You will need to
enter this ID again when you resume the call.
