Opening the User Interface
FRITZ!Box Fon 5124 – 3 Opening the User Interface
23
3
Opening the User Interface
Once you have connected FRITZ!Box Fon with one or more
computers, or with a network hub or switch, you can
configure the settings for operation with FRITZ!Box Fon.
The settings are configured on the FRITZ!Box Fon user
interface. This interface can be accessed from any of the
computers connected with FRITZ!Box Fon. The settings are
saved in FRITZ!Box Fon.
Open your Internet browser on the computer and enter
“fritz.box”.
The “fritz.box” address entry in the address field of an Internet
browser
When the FRITZ!Box Fon user interface is started, FRITZ!Box
Fon is ready for operation.
The FRITZ!Box Fon user interface has several pages, each of
which can be accessed directly by clicking the menu
command on the left edge.
If the user interface does not open, see the instructions in
the section “Errors Opening the User Interface” from
page 53.
See the section “Configuring Internet Connections” from
page 24 for instructions on configuring Internet connections
for FRITZ!Box Fon.
