9
3
Advanced Settings
Your Streaming DAC offers a lot of custom specific settings in its menu system. To enter the menu just
tap on the button MENU. The button now changes to EXIT. A second tip on this button leads you to
the normal operating mode. When the menu system is active you can select the desired function using
the buttons
!
ITEM
"
. The setting is done using the buttons
!
VALUE
"
.
Depending on the actual source the menu system offers a range of settings described in the following.
3.1
personal setup
The personal setup offers you a range of settings to individualize the device according to your personal
needs. To enter the personal setup, please switch off your Streaming DAC on the rear of the unit with
the mains switch (31). Keep the multifunctional button (9) under the display pressed while you switch
on the unit again (31). As soon as the display shows
***personal setup***
you can
release the
multifunctional button (9).
3.2
set display brightness
Sets display brightness 25% to 100%.
NOTE
: The setting 100% can lead to "burn in" effects on the display if the unit is operated in this
setting for a very long time. So please switch the unit to stand by, if not in use.
3.3
bass & treble control
The bass & treble control option allows you to define if the tone settings are being applied globally
(
GLOBAL
) or to an individual input only (
INDIVIDUAL
).
3.4
skip unused inputs
Deactivate unused inputs (
SKIP
). The unit will then skip these inputs when the source selector (2) is
being used or if you select the inputs via the RC 9 remote control.
3.5
define input names
You can individually set the names (max. 8 characters) of the different sources shown in the display (4).
Proceed as follows:
Press
SELECT
. The display shows now on the left side the old name, on the right side the new name.
The character to change is marked by an underscore. The keys
!
ITEM
"
select the input, the keys
!
POS
"
select the position of the character to change. The marked character can be set using the
volume knob (10). When you are ready, simply press
BACK
. and the new names will be stored.
3.6
gain fix / variable
In a surround system the channel balance, tone setting and bass management are done by the
decoder. This setting must not be altered by another component because the channel balance the
would be incorrect. For this application your Streaming DAC offers a fixed gain function.
Set the input where the main channels of the surround system are connected to fixed gain. When this
input is selected, tone controls are bypassed, balance is set to neutral position and the gain is on a
fixed level independently of the volume setting on the other inputs.
