6
2. Control elements and connectors
2.1 EVOLUTION CD3.2 / 5.2 overview
The numbers in the drawings below mark the control elements. They refer to the numbers in the text, where
the operation of the unit is described. As the control elements and connectors for CD 3.2 and CD 5.2 are
identical only front and rear panel of CD3.2 is shown.
Front panel
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1. Button power (on / standby)
2. Button < (Filter, programming playlist)
3. Button > (Filter, programming playlist)
4. Button PROG (Programming playlist, random)
5. Button FILT (select filter)
6. Button REP (repeat)
7. LED (lights up, when unit is stand by)
8. Display
9.
CD-slot
10. Button STOP
11. Button PAUSE
12. Button PLAY
13. Button I<< (skip /search down)
14. Button I>>(skip /search up)
15. Button EJECT
Rear panel
28
27
26
25
24
23
22
21
20
19
18
17
16
O
I
16. Analogue outputs XLR
17. Analogue outputs RCA-cinch
18. Digital input AES/EBU
19. Digital inputs RCA-cinch 1&2
20. Digital inputs optical 1&2
21. Digital input USB1
22. Digital input USB2
23. Dig out optical
24. Dig out coax
25. RS232 Communication port
26. Connector for external IR-receiver
27. Mains switch
28. Mains connector
2.2 Pin configuration of connectors
1
3
2
2
3
1
3,5mm stereo
+5V supply
IR-Signal
GND
infrared input
XLR-input
XLR-outputs
external IR-input
1 = GND (shield)
1 = GND (shield)
2 = non inverting input
2 = non inverting output
3 = inverting input
3 = inverting output
