background image

13

8. If something doesn’t work.......

Some putative defects are often caused by mistakes in operation. Sometimes other units connected to the
unit can cause problems. Therefore please read the following tips before You consult Your dealer or us.

Disc is inserted, but the CD is not recognized. Display shows "no disc" or "no audiodisc"

  The CD may be inserted upside down or the surface has to be cleaned.

  The inserted disc is scratched and not readable

  You have inserted a DVD or a data disc.

No music although the display shows “play”

  Check the cables to the amplifier.

No music while digital input is selected, display shows "NO SIGNAL"

  Check digital cables and plugs

  The digital signal is not a PCM stereo signal. The CD3.2 / 5.2 cannot handle sourround signals or signals

with compressed data. Set the signal source to "linear PCM stereo".

Infrared remote control doesn’t work

  Check the batteries of Your remote control transmitter

  Point with the remote control transmitter directly to the unit.

9. Conditions of warranty (EC only)

If despite expectations a defect occurs that cannot be repaired by yourself or your dealer, we undertake the
repair of your unit free of charge for up to three years from date of purchase. The warranty covers the costs
of material and working time, transport costs are to be borne by the owner.

Provisions for this warranty are:

  The unit must have been purchased from an authorized dealer. Equipment from other sources will not be

repaired, not even at charge.

  The warranty registration card, together with a copy of the bill of sale, must be received by us within four

weeks of the date of purchase.

  The defect must not have been caused by improper handling or misuse.

  Return the unit to us only in its original packing. If this is not possible we are entitled to refuse

acceptance. We will not assume responsibility for transport damage under any circumstances.

  A short description of the defect is to be included with the returned unit.

  In cases of doubt we reserve the right to request a copy of the bill of sale.

  We also reserve the right to levy a handling charge for items returned without good or valid reason, or if

the unit proves to be not defective.

NOTE

If you are returning the unit from a country other than Germany you should ensure that correct export
documents are obtained. We cannot accept any charges for costs arising from improper or incomplete export
documentation.

If you have purchased your unit from a dealer outside Germany please refer to him or the relevant importing
firm to process the warranty.

Summary of Contents for EVOLUTION CD 3.2















Reviews: