15
2.8
Sound settings (Bass/Treble)
By pressing and holding the balance button
BAL
(8) the right-left balance of the output signal
can be adjusted globally for all input channels by means of the volume control (9). The current
setting is shown in the display (6) on the right side while the
BAL
button is pressed. As soon
as you release the button, the set value is stored and the unit returns to its normal operating
state.
The integrated tone control electronics for adjusting the bass or treble components of the A
30.3 is activated as soon as you make a setting under
BASS
or
TREBLE
. If a neutral setting
(
BASS
= 0,
TREBLE
= 0) is selected, the tone control electronics will remain deactivated until
one of these parameters is changed. The display will show
TONE ON
when the tone control is
activated and
LINEAR
when it is deactivated.
2.9
Reset (factory settings)
The
RESET
option offers you the possibility to reset the device to the original delivery state
and thus to all factory settings. The following settings are reset in the course of a
RESET
:
ü
Individual input sensitivities (level settings). For details see section 2.6.
ü
Cross-channel adjustments of the right-left balance (see section 2.7) and the bass/treble
sound settings (see section 2.8)
ü
AV Pass Through function for high level inputs (13,15) (see section 1.11)
Die
RESET
Option bietet Ihnen die Möglichkeit, das Gerät in den ursprünglichen
Auslieferungszustand und damit auf alle Werkseinstellungen zurückzusetzen. Folgende
Einstellungen werden im Zuge eines
RESETS
zurückgesetzt:
ü
Individuelle Eingangsempfindlichkeiten (Pegeleinstellungen). Details siehe Abschnitt 2.6.
ü
Kanalübergreifende Anpassungen der Rechts-Links-Balance (siehe Abschnitt 2.7) und der
Bass/Treble-Klangeinstellungen (siehe Abschnitt 2.8)
ü
AV Pass Through
Funktion für Hochpegel-Eingänge (17,19) (siehe Abschnitt 1.11)
To perform a
RESET
, switch off the device with the mains switch (22) on the back. Then press
and hold the
TREBLE
button (3) and the
LEVEL
button at the same time and switch the unit
on again with the power switch (22) on the back. Now press the
BAL
button (8) to perform the
RESET
or
BASS
(4) to cancel the process. Wait until the unit changes to standby mode. Your
A 30.3 integrated amplifier is now reset to its factory settings.
2.10
Automatic power-off
The A 30.3 integrated amplifier is equipped with an energy-saving automatic power-off function
(
SET
AUTO OFF FUNCTION
). If no music is played for a period of 20 minutes or no function
is activated on the unit, the A 30.3 automatically switches to standby mode. By pressing the
on/off button (2) the unit can of course be switched on again at any time.
Summary of Contents for A 30.3
Page 1: ...Operating Instructions A 30 3...
Page 2: ......
