30
C
hanging the frequency channel and other features of the Avlite wireless remote controller
can be accomplished by accessing the ‘Controller Setup Menu’. Press and hold the menu
button on the Avlite wireless remote controller for 3 seconds to navigate to the ‘Controller
Setup Menu’ and step through the menu options using the ‘Menu’ button. The following
menu options are available:
•
Screen Backlight
-
A backlight percentage of 50% is used as the default setting but
can be changed to a value between 0-100%.
•
Connection Method
-
The 2 available connection methods are ‘Radio control’, which
is used for a standard wireless connection and ‘Direct connection’ which is used for
programming the lights. See section 6.0 Direct Connection for more information.
The connection method is set at ‘Radio Control’ as default.
•
Flash Code Selection
-
The controller allows flash code selection as 3-digit numbers.
•
Advanced Operation
-
Select from either ‘Disable’ or ‘Enable’. The Advanced Operation
is set at ‘Enable’ as default.
•
Diagnostic
-
Select from either ‘Disable’ or ‘Enable’. The Diagnostic menu option is set
at ‘Enable’ as default.
•
Radio Information
-
Displays the unique ID code for the radio module. There are no
user adjustable settings for this menu option.
•
Radio Channel
-
Select from either ‘Encrypted’ or ‘Unencrypted’ then select a
hexadecimal number from 0x0c to 0x17.
•
Radio Encryption Key
-
The Avlite wireless remote radio controller has been
shipped preprogrammed with a default 128-bit encryption key. Although this
does not need to be adjusted, the encryption key can be altered if required
by the user via the arrow keys on the Avlite wireless remote controller.
If the Avlite wireless remote controller becomes lost or broken, the encryption key can
simply be entered into a new controller without the need to reprogram all the lights in
the radio control system.
NOTICE:
The radio encryption key for the lights must be the same as the key
set in the Avlite wireless remote controller in order for the lights to
respond to the controller. If the radio encryption key is changed from
the default setting, it will be necessary to change the encryption key
in
ALL
the lights in the system.
NOTICE:
If the light is in STANDBY mode, it will respond to the diagnostic
according to the above and then revert back to the STANDBY mode
once the diagnostic has been completed.
5.2 Controller Menu (Advanced)
