Latest products and information available at www.avlite.com
15
AV23 Solar Obstruction Light
Trouble Shooting
Problem
Remedy
Light will not activate.
• Ensure light is in darkness.
• Wait at least 60 seconds for the program to initialise in darkness.
• Ensure switch setting is on a valid code (See
Flash Codes
section of this
manual).
• Ensure battery terminals are properly connected.
• Ensure battery voltage is above 12.6volts.
Timing codes will not change.
• Turn rotary switches several times to ensure contacts are clear.
Light will not operate for the
entire night.
• Expose light to direct sunlight and monitor operation for several days.
Avlite products typically require 3.0 hours of direct sunlight per day to
retain full autonomy. From a discharged state, the light may require
several days of operational conditions to ‘cycle’ up to full autonomy.
• Reducing the light output intensity or duty cycle (flash code) will reduce
current draw on the battery.
• Ensure solar module is clean and not covered by shading during the day.
Light is constantly on during
the day.
• Ensure the flash code is not set to F F. This flash code is for testing
purposes only and will be steady on for 24 hours a day.
