26
Wiring Instructions-Data Cable:
•
Connect the white Ground Ref (GNDA) conductor from the MI to the GND labelled
terminal in the top junction box
•
Connect the red Alarm Common (COM) conductor from the MI to the COM labelled
terminal in the top junction box
•
Connect the green alarm signal (NC) conductor from the MI to the NC labelled terminal
in the top junction box
•
Connect the black Photocell Input (IN1) conductor from the MI to the PC labelled
terminal in the top junction box
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
b. Run two cables from the top junction box to the Control Unit, one for power and one
for data.
Refer to section 7.2.3 Cabling Requirements for recommended cable sizes.
