Safety Precautions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2
3
Safety Instructions
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS GIVEN IN THIS MANUAL.
1. Do not expose this unit to rain or moisture.
2. Do not expose this unit to high heat.
3. Do not install this unit near any heat sources.
4. Do not remove the cover at any time. Refer all servicing to qualified
personnel only.
Introduction
Table of Contents
Thank you for your purchase of the AVLinx ADV2.1 HDTV Switch. At AVLinx, we
are motivated by a passion for quality audio/video equipment that fulfills the
technological needs of our customers. Every item we sell is designed to provide
the ultimate in signal integrity, system integration, and user control.
This product has been designed and manufactured to switch up to two DVI Digital
HDTV video and digital audio signal inputs to a single output. For the best results
when using this product, we recommend that you take the time to read through this
manual before you attempt to connect it to any other equipment. This manual will
accustom you to the various system connections and operating features
associated with this product. Keep this manual in a safe place for any future
reference.
In the spaces provided below, record your model and serial number. Refer to these
numbers when trying to acquire information or servicing requirements for this
product.
Model: ___ADV2.1______ Serial Number: _____________________
CAUTION: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
DISASSEMBLE. DANGEROUSLY HIGH
VOLTAGES ARE PRESENT INSIDE
THE UNIT. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.
!
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Introduction
Safety Precautions
Safety Instructions
Table of Contents
Identification
Accessories
Front Panel
Back Panel
Remote Control
-Operating Range
-Inserting Batteries
The ADV2.1
Connections
DVI Video Connections
Digital Audio Connections
Operations
Changing the Unit’s Power State
-Using the Input Selector Button
-Using the Remote Control
-Using the RS-232 Communication Port
Switching Inputs
-Using the Input Selector Button
-Using the Remote Control
-Using the RS-232 Communication Port
LED Display Dimming
-Using the Remote/Input Selector Button
-Using the RS-232 Communication Port
Using an Alternate Remote Control
Programming Input Selector Keys
Programming a Power Key
-Power On/Off
-Power On Only
-Power Off Only
Restoring Default Remote Control Codes to the Unit
Troubleshooting
Warranty
Servicing
Specifications
Appendices
2
2
2
3
4
4
4
4
5
5
5
6
6-7
6
7
8-10
8
8
8
8
9
9
9
9
10
10
10
11-13
11
12-13
12
12
13
13
14-15
16
17
17
18-19
