background image

External audio resource play 

Connect the external audio sources with the 

RIGHT AUX jack

 on the headphone by 3.5mm audio 

cable.  

Charging the battery 

Fully charge the battery for about 4 hours before using this headphone for the first time. 

Plug the smaller end of USB charging cable into the interface of the USB charging port (4). 

Next, plug the other end of the USB charging cable into other power charging devices or a 
computer with the power on. The 4 led indicators will keep in blue during charging. 

Trouble shooting 

Q1. Why can’t I power on the headphone? 

A1: The headphone may have run out of the battery power. Please charge the battery via the 
included charging cable. 

Q2. Why can’t I connect the headphone to my Bluetooth device? 

A2.1.   The Bluetooth function on your device may have been turned off. Please turn on the 
Bluetooth function on your device and allow it to search for compatible devices. 

A2.2 The headphone may have been connected to another device. Please disconnect (unpaired) 
the headphone from the previous device before connecting them to a new one. 

A2.3. The headphone may not have been recognized by your device. 

Please turn off the headphone, turn them back on, and search for the headphone on your 
Bluetooth enabled device, and make the connection again. 

A2.4. The headphones may be too far away from your Bluetooth device. Please make sure that the 
headphones are close enough to your device and there is no obstacle between them. 

Q3. Why aren’t the headphones playing sound tracks in the Bluetooth mode? 

A3.1. The headphones may not have selected as the output device. Please adjust the setting on 
your Bluetooth enabled device to use the headphones to play the sound tracks. 

A3.2. The volume may have been adjusted to the minimum. Please adjust the sound wheel to 
reach desired volume. 

Q4. Why is the sound quality very poor in the Bluetooth mode? 

A4.1: The Bluetooth connection may not be in its optimal condition. Please make sure that the 
headphones are close enough to your device, and there is no obstacle between them. 

 

Product Specifications: 

Summary of Contents for BNC100











Reviews: