HDMI 4K HDBaseT Wallplate Kit
16
5.
System Operation
5.1
IR Learning
The IR learning function allows user to use the buttons of control panel to displace
some keys of IR remote which can control display device or other devices. The
control panel has four buttons:
ON
,
OFF
,
HDMI 1
and
HDMI 2
, but
HDMI 1
and
HDMI 2
buttons
do not support IR learning function, because they are designed for
source selection.
Operation Procedure:
1)
Press and hold
HDMI 1
until the
ON
and
OFF
light up, and then release
HDMI 1
, the
HDMI 1
will go dark to enter IR learning mode.
2)
Press
ON
to enter IR learning status, and it will keep blinking blue.
3)
Press the corresponding key (such as power on key) on IR remote,
meanwhile, put IR remote close to the IR sensor of control panel.
4)
Once set up successfully, the button
ON
will stop blinking.
5)
Next, repeat the above steps to set another button
OFF
.
6)
Finally, Press and hold
HDMI 2
to exit IR learning mode.
Apply IR Learning Function:
1)
Press
ON
to turn on the display device.
2)
Press
OFF
to turn off the display device.
Note:
When the control panel is in the IR learning mode, press and hold
HDMI 2
for five
seconds can exit.
If there is no operation for sixty seconds, the control panel will automatically exit the
IR learning mode.
All buttons will go dark while the control panel exits IR learning mode successfully.