-
6-
NOTICE
1.
is that the display has to support at least Full HD. If default Full-HD EDID still cannot work, user
(Please note that the display with lowest resolution must be connected to output 1)
Select to Mode 5 - Full-HD(1080p@60) 8bit 2D video & 2ch audio
(1)
(2)
Power on the device
Select to Mode 6 Learning EDID from output 1
(1)
(2)
Power on the device
(3)
It will automatically learn EDID from output 1
[NOTE]
a.
If the user wants to change EDID mode, please power cycle the device after setting rotary switch.
2.
mode), experiencing a short period of time without displaying might be expected. The splitter will
do Automatic EDID learning and generate the best EDID among all connected monitors
3.
Firmware update is proceeded through Micro-USB.
(1)
Save the firmware file (.bin) & software in the same folder.
(2)
a) Connect the Micro-USB cable between PC and device, b) power on the device.
(3)
Open firmware update software and then device will start to update firmware automatically.
(4)
automatically.
(5)
Power cycle the device
