Add casters to a K-series Loom
Updated: June 8, 2021
Page | 4
Figure 4 - Caster attached to rear leg of loom
Page 1: ... be drilled are size H or 0 266 inch diameter Two thru holes will need to be drilled for each bracket Note The casters are attached to the side of the loom On the rear legs the holes are drilled through the narrow side of the leg Please read all of this handout and review the pictures on pages 3 4 before drilling the holes 1 Use the front casters diagram to determine where the holes should be dril...
Page 2: ...other When the loom is not being moved the casters are securely locked into position Note The casters at the front of the loom are positioned at the sides The casters at the rear of the loom face the back 1 Find the four casters and the hardware There are four long bolts and four short ones The short bolts are used on the front of the loom and the long bolts are used at the rear 2 Place a caster o...
Page 3: ...igure 3 Caster attached to front leg of the loom 5 Place a caster at a rear leg of the loom against the drilled holes with the bracket facing down Use the long bolts to secure the casters to the loom 6 Secure each bolt with a nut 7 Repeat for the other rear leg ...
Page 4: ...Add casters to a K series Loom Updated June 8 2021 Page 4 Figure 4 Caster attached to rear leg of loom ...
