AVL Industrial Dobby Loom, User Manual

Page: 18 / 67

IDL Setup
Page | 12
S
ETUP THE
A
IR
S
YSTEM
Compressor
Your compressor must be able to deliver a minimum of 2
per minute at 115 pounds per square
Filter-Regulator (FR)
The FR (Filter, Regulator) is mounted on the back of the
This is where the air line coming from the compressor
The primary function of this device is to
the system.
Air pressure is measured in pounds
familiar with pneumatic systems, just think of air as
car. More air equals more power.
You’ll see a gauge on the FR and an adjustment knob
Turn this knob clockwise to increase pressure.
from the FR at 105+ p.s.i. The operating pressure
around 120 p.s.i.
Figure 2 - FRL (may vary)
Industrial Dobby Loom User's Manual
Setup the Air System
YSTEM
compressor must be able to deliver a minimum of 25 cubic
pounds per square inch.
Regulator) is mounted on the back of the Computer
This is where the air line coming from the compressor connects to the loom.
The primary function of this device is to control the air pressure coming into
Air pressure is measured in pounds-per-square-inch (P.S.I.). If you’re not
r with pneumatic systems, just think of air as you think of gas in your
power.
see a gauge on the FR and an adjustment knob immediately above it.
this knob clockwise to increase pressure. You should start pressure
the FR at 105+ p.s.i. The operating pressure should generally
FRL (may vary)
Industrial Dobby Loom User's Manual
Setup the Air System
cubic feet of air
Computer
Cabinet.
connects to the loom.
the air pressure coming into
you’re not
you think of gas in your
immediately above it.
should start pressure
generally be