AVL05 User Guide
V3.32
Page 10 of 41
1.4.2 I/O ports
Notes: The sequence of the 13 sockets in the diagram are for the
corresponding sockets in the above picture. Please do not confuse the
direction, the Switch is the right side of I/O Sockets. The function is as
below:
NO.
Function
I/O 01 When SOS Button cable is connected to GND(port 02), namely
trigger, the unit will send out a data via SMS or GPRS, alarm type
is “01”
I/O 02 GND, use for input GND
I/O 03 When this cable is connected to GND(port 02), Device will send a
GPRS alarm data to Server. (Old Hardware version is Reset
button)
I/O 05 Using a phone can set the voltage value of the digital output
through “025” instruction, high or low, by virtue of it, user can
remote Control the Car window or door close/open
I/O 07 The function is the same as I/O 05
I/O 08 Connect to Relay to control the Cut Current function
I/O 09 When this cable is connected to GND(port 02), Device will send a
GPRS alarm data to Server. And when connect is lose , Device
also will send a GPRS alarm data to server.
2)GND
4) 6) 8)Cut
Car
Current
10) 12) 14)
16)
18)
GND
20)V+
(12V-24V)
1)SOS
Button
(With GND)
3)Button
A
(With GND)
5)Digital
Output A
(12V)
7)Digital
Output B
(12V)
9) Switch
Input 1
(With GND)
11) Switch
Input 2
(With GND)
13)Digital
input1
(12V)
15)Digital
input2
(12V)
(17)
Reset
(19)
Summary of Contents for AVL05
