iDirect Modem
AvL Technologies
| Proprietary – Content is Subject to Change without Notice
4
2.3.1.
Serial Communication Connection
To communicate with the iDirect modem through a serial connection, connect the serial cable from the AAQ antenna
system to the Console port on the modem. Connect power to all devices. Confirm that the serial port settings are
correct per section 3 of this document.
Figure 2 – Serial Setup
2.3.2.
Ethernet Communication Connection
When setting the system to communicate by Ethernet, connect both the controller and the iDirect modem to the AvL
CIP or other network switch so the controller can query the modem over the network. Ensure power is connected to
each device. Confirm that the Ethernet settings are correct per section 3 of this document.
Figure 3 – Ethernet Setup
