iDirect Modem
AvL Technologies
| Proprietary – Content is Subject to Change without Notice
13
4.2.
Sensor Outputs
Path
Main Window → View→ Sensor Output
Level 0
Check the boxes beside any Sensor Outputs you wish to view for monitoring operations.
Figure 10 – Sensor Output
The table below describes the Sensor Outputs relevant to this module
Item
Description
iDirect Beam Name
If entered, this is the customers name for each beam in a network.
iDirect Detected Noise
A measure of unwanted signal power used for calculating the SNR
(Signal Noise Ratio)
iDirect Min Lock Signal
Not used in iDirect R11.9 – Display zero
iDirect Min Valid Signal
Not used in iDirect R11.9 - Display zero
iDirect Rx Lock
Flag that indicates whether iDirect unit has declared carrier lock.
iDirect Rx Signal
Receive signal strength as read from modem.
iDirect Signal Average
Readout of average signal as read from AAQ
iDirect Signal Gradient
Mathematical approximation of signal change over time in coordination
with “iDirect Gradient Sample Time” config. Item as read from AAQ.
