Avizia AVZ-MXC-DOC-UIG-04 User And Installation Manual Download Page 8

Page: 8 / 16

Assembly and Installation

Display Installation | MX200

This cart has been designed
specifically for the Cisco
Telepresence MX200 or MX300
flat panel displays. It is not
recommended that any other
display be used to mount on this
cart.

For MX300 installation proceed to
page 8, DISPLAY INSTALLATION |
MX300.

CAUTION:

Before attaching display to cart, set the brakes

on the back wheels by pressing down on the tabs to prevent
instability that could result in possible injury.

1. Carefully slide display onto column assembly (D).

WARNING:

Two people are required to lift the

chassis. To prevent injury, keep your back straight and
lift with your legs, not your back.

Statement 164

2. Hand tighten two M6x40mm socket head cap screws (J)

into the top two holes on display and interface plate.

3. Hand tighten two M6x40mm socket head cap screws (J)

into the bottom two holes on display and interface plate.

4. Tighten all four screws using Hex Key.

5. Proceed to page 10, STORAGE SHELF INSTALLATION.

Apply Brakes

(D)

Extended Height Cart | User & Installation Guide

Summary of Contents for AVZ-MXC-DOC-UIG-04

















Search results

Summary of Contents for AVZ-MXC-DOC-UIG-04

Reviews:

Related manuals for AVZ-MXC-DOC-UIG-04

Brands by name

Popular brands

Avizia AVZ-MXC-DOC-UIG-04, User And Installation Manual

Search results

Summary of Contents for AVZ-MXC-DOC-UIG-04

Reviews:

Related manuals for AVZ-MXC-DOC-UIG-04

Brands by name

Popular brands