Assembly and Installation
Cart Assembly
CAUTION:
Attachment holes may be damaged if a power
drill is used to insert button head cap screws. Screws should
first be inserted and turned BY HAND with the hex key or with
a handheld screwdriver BEFORE using a hex head drill bit and
power drill (optional) to complete the attachment.
1. Assemble two legs (A and B) to the column assembly (D)
using two 5/16-18 x 4-1/4” button head cap screws (E)
and one end cap (C) per leg.
NOTE:
When attaching the legs, make sure the larger
holes are on the outside and the smaller holes on the
inside and locking casters are to the rear of the cart.
CAUTION:
The INNER COLUMN of the Column Assembly
IS SHIPPED DISENGAGED and may pinch hands! Hold both
inner and outer posts (columns) while removing from box.
1
(E) x 4
(A) x 1
(B) x 1
(D)
(C) x 2
Cable
Management
Egress
Locking Wheels x 2
Cart Handle
locking knob for
height adjust-
ment
Extended Height Cart | User & Installation Guide
© 2013 Avizia Inc. All rights reserved. | aviziatech.com | AVZ-MXC-DOC-UIG-04
6
