AVIX Autonomic Mak II User Manual Download Page 10

9

Disposal

Do not dispose of the AVIX Autonomic with household 
material. Recycle in accordance with the regulations 
applicable to your location.

Always recycle batteries.

6. Warranty

 CAUTION: Any attempt to disassemble the product beyond 

disconnecting modules voids the product warranty.

The AVIX Autonomic is developed and produced according to the 
highest quality standards. Should you encounter any problems 
with your product, please read this manual carefully. If your AVIX 
Autonomic shows a defect, or if you need assistance, please contact 
your local dealer. Should any defect arise as a result of production 
faults, free repair or replacement is guaranteed. The AVIX Autonomic 
has a warranty period of 12 months, starting on the date of purchase. 
In case of replacement, the warranty period of the original product will 
remain valid. 

Warranty conditions

The warranty is valid if the AVIX Autonomic is used in accordance with 
the instructions in this manual and for the purpose for which it was 
designed. The warranty is valid when a valid receipt is presented that 
shows the date of purchase, the name of the dealer and the product 
name.

The warranty is invalid when:

• Damage due to falling or jolting occurs.
• The serial number has been removed.
• Attempts to disassemble the product have been made. 

Disconnecting a module is not considered disassembly.

• Any repairs or attempts at repairs have been carried out by 

unauthorized persons.

• Any defects have occurred as a result of using equipment other than 

provided by Bird Control Group (including, but not limited to, using a 
different power adapter). 

• Any defects have occurred as a result of misuse or use in 

environments that are not prescribed.

• The defect is a result of normal wear of replaceable parts (including, 

but not limited to, the battery).

For example; when waypoint 3 is deactivated, the laser will be 
switched off between waypoints 3 and 4. After waypoint 4, the laser 
will switch on again. 

10.6

  After completing the pattern, press the ( 

 ) in the top right 

corner of the window. 

Step 11

  

You will return to the dashboard as shown in figure 2.5 on page 3. 
After completing pattern(s) and timeslot(s), press the  

 ) button at the top of the dashboard screen to 

activate the AVIX Autonomic for automated bird repelling. The LED on 
the back of the Autonomic turns from yellow to blue.

5. Maintenance 

 CAUTION: Always switch OFF the AVIX Autonomic before 

performing maintenance. 

Perform the following maintenance steps at least once a week: 
• Ensure the AVIX Autonomic cannot wobble or tilt on its position. 

If stability has been diminished, add more ballast to the frame or 
secure the system more firmly to the subsurface. 

• Ensure the AVIX Autonomic executes its patterns in the intended 

areas. 

Perform the following maintenance steps at least once a month: 
• Clean the lens with a wet cloth. A dirty lens may cause undesired 

reflections and reduced effectiveness.

• Determine whether the movement of the system is hampered in any 

way. Remove any foreign matter between the moving parts of the 
Motor Platform. Disconnect the AVIX Autonomic from power before 
performing this step.

• Check if the time settings are still correct. Note that the AVIX 

Autonomic won’t automatically adjust to daylight saving time.

Storage

The AVIX Autonomic is designed to withstand outdoor environments. 
If the AVIX Autonomic will not be used for an extended period of time, 
store it, in a dry, well-ventilated environment. 

 CAUTION: Do not store your AVIX Autonomic in a location that is:

• Poorly ventilated or subject to humidity of over 60%.
• Exposed to temperatures above 65°C (149°F) or below -20°C (-4°F).

The AVIX Autonomic can be cleaned with a wet cloth. Do NOT use a 
high-pressure pump for cleaning as this may damage the product.

Summary of Contents for Mak II













Reviews: