3.
Click
Configure
Module IP
to open
Multiviewer
Module Setting
window.
This is to check or modify the IP address / COM port baud rate of the master
Multiviewer modules.
NOTE:
Use the Galaxy program if you wish to arrange cascaded modules into different
groups (refer to the Galaxy program User’s Manual for more details).
4.
On the
Current Setting
section, click the
Auto
radio button if the
Multiviewer’s IP address is unknown. If the IP address of the master module
is known but needs to be modified, click to select the
User define
radio
button.
5.
Enter the new
IP
address and/or the
Baud rate
in the
New Setting
section.
6.
Click
Connect
to start scanning.
125
